top of page
Holle Organic Milk Formula Stage Pre
What You'll Need :
- Boiled Water
- Sterilized Bottles
- Teat & Cap
- Formula Powder
- Measuring Spoon (found in your formula box)
Steps :
1. Wash hands & sterilize all equipment following the bottle's manufacturer's instructions.
2. Boil 1 litre of freshly run water & cool it to about 50 degrees Celsius.
Do not use artificially softened or repeatedly boiled water.
3. Fill the bottle with about half of the desired amount of water.
4. Using the scoop provided, add the correct number of scoops of powder (1 level scoop of power to each
fluid ounce of water, approximately 30 millilitres).
Level off the powder using the scoop leveller (do not press the powder).
5. Place sterilized teat & cap on the bottle & shake well.
Add the rest of the water and shake again.
6. Cool to drinking temperature (approximately 37 Degrees Celsius) by holding the bottle under cold running
water, & feed immediately.
Always test the temperature of the milk before feeding.
Feeding Guide:
Holle Organic Milk Formula Stage 1
What You'll Need :
- Boiled Water
- Sterilized Bottles
- Teat & Cap
- Formula Powder
- Measuring Spoon (found in your formula box)
Steps :
1. Wash hands & sterilize all equipment following the bottle's manufacturer's instructions.
2. Boil 1 litre of freshly run water & cool it to about 50 degrees Celsius.
Do not use artificially softened or repeatedly boiled water.
3. Fill the bottle with about half of the desired amount of water.
4. Using the scoop provided, add the correct number of scoops of powder (1 level scoop of power to each
fluid ounce of water, approximately 30 millilitres).
Level off the powder using the scoop leveller (do not press the powder).
5. Place sterilized teat & cap on the bottle & shake well.
Add the rest of the water and shake again.
6. Cool to drinking temperature (approximately 37 Degrees Celsius) by holding the bottle under cold running
water, & feed immediately.
Always test the temperature of the milk before feeding.
Feeding Guide:
Holle Organic Milk Formula Stage 2
What You'll Need :
- Boiled Water
- Sterilized Bottles
- Teat & Cap
- Formula Powder
- Measuring Spoon (found in your formula box)
Steps :
1. Wash hands & sterilize all equipment following the bottle's manufacturer's instructions.
2. Boil 1 litre of freshly run water & cool it to about 50 degrees Celsius.
Do not use artificially softened or repeatedly boiled water.
3. Fill the bottle with about half of the desired amount of water.
4. Using the scoop provided, add the correct number of scoops of powder (1 level scoop of power to each
fluid ounce of water, approximately 30 millilitres).
Level off the powder using the scoop leveller (do not press the powder).
5. Place sterilized teat & cap on the bottle & shake well.
Add the rest of the water and shake again.
6. Cool to drinking temperature (approximately 37 Degrees Celsius) by holding the bottle under cold running
water, & feed immediately.
Always test the temperature of the milk before feeding.
Feeding Guide:
Holle Organic Milk Formula Stage 3
What You'll Need :
- Boiled Water
- Sterilized Bottles
- Teat & Cap
- Formula Powder
- Measuring Spoon (found in your formula box)
Steps :
1. Wash hands & sterilize all equipment following the bottle's manufacturer's instructions.
2. Boil 1 litre of freshly run water & cool it to about 50 degrees Celsius.
Do not use artificially softened or repeatedly boiled water.
3. Fill the bottle with about half of the desired amount of water.
4. Using the scoop provided, add the correct number of scoops of powder (1 level scoop of power to each
fluid ounce of water, approximately 30 millilitres).
Level off the powder using the scoop leveller (do not press the powder).
5. Place sterilized teat & cap on the bottle & shake well.
Add the rest of the water and shake again.
6. Cool to drinking temperature (approximately 37 Degrees Celsius) by holding the bottle under cold running
water, & feed immediately.
Always test the temperature of the milk before feeding.
Feeding Guide:
Holle GOAT Organic Infant Milk Stage 1
What You'll Need :
- Boiled Water
- Sterilized Bottles
- Teat & Cap
- Formula Powder
- Measuring Spoon (found in your formula box)
Steps :
1. Wash hands & sterilize all equipment following the bottle's manufacturer's instructions.
2. Boil 1 litre of freshly run water & cool it to about 50 degrees Celsius.
Do not use artificially softened or repeatedly boiled water.
3. Fill the bottle with about half of the desired amount of water.
4. Using the scoop provided, add the correct number of scoops of powder (1 level scoop of power to each
fluid ounce of water, approximately 30 millilitres).
Level off the powder using the scoop leveller (do not press the powder).
5. Place sterilized teat & cap on the bottle & shake well.
Add the rest of the water and shake again.
6. Cool to drinking temperature (approximately 37 Degrees Celsius) by holding the bottle under cold running
water, & feed immediately.
Always test the temperature of the milk before feeding.
Feeding Guide:
Holle GOAT Organic Infant Milk Stage 2
What You'll Need :
- Boiled Water
- Sterilized Bottles
- Teat & Cap
- Formula Powder
- Measuring Spoon (found in your formula box)
Steps :
1. Wash hands & sterilize all equipment following the bottle's manufacturer's instructions.
2. Boil 1 litre of freshly run water & cool it to about 50 degrees Celsius.
Do not use artificially softened or repeatedly boiled water.
3. Fill the bottle with about half of the desired amount of water.
4. Using the scoop provided, add the correct number of scoops of powder (1 level scoop of power to each
fluid ounce of water, approximately 30 millilitres).
Level off the powder using the scoop leveller (do not press the powder).
5. Place sterilized teat & cap on the bottle & shake well.
Add the rest of the water and shake again.
6. Cool to drinking temperature (approximately 37 Degrees Celsius) by holding the bottle under cold running
water, & feed immediately.
Always test the temperature of the milk before feeding.
Feeding Guide:
Holle GOAT Organic Infant Milk Stage 3
What You'll Need :
- Boiled Water
- Sterilized Bottles
- Teat & Cap
- Formula Powder
- Measuring Spoon (found in your formula box)
Steps :
1. Wash hands & sterilize all equipment following the bottle's manufacturer's instructions.
2. Boil 1 litre of freshly run water & cool it to about 50 degrees Celsius.
Do not use artificially softened or repeatedly boiled water.
3. Fill the bottle with about half of the desired amount of water.
4. Using the scoop provided, add the correct number of scoops of powder (1 level scoop of power to each
fluid ounce of water, approximately 30 millilitres).
Level off the powder using the scoop leveller (do not press the powder).
5. Place sterilized teat & cap on the bottle & shake well.
Add the rest of the water and shake again.
6. Cool to drinking temperature (approximately 37 Degrees Celsius) by holding the bottle under cold running
water, & feed immediately.
Always test the temperature of the milk before feeding.
Feeding Guide:
SHOP
ACCOUNT
-
-
COMPANY
FOLLOW & CONTACT US
-
-
© 2020 All Right Reserved by Organic Bum
bottom of page